Dynamic Rotating Rigid Probe (with stainless steel housing) for bolt holes testing (coils are positioned at right angles to the probe shaft length, Differential Unshielded / Shielded)

: Hits: 762

Dynamic Rotating Rigid Probe (with stainless steel housing) for bolt holes testing (coils are positioned at right angles to the probe shaft length, Differential Unshielded / Shielded)

Eddy-current Dynamic Rotating Rigid Probe (with stainless steel housing) for bolt holes testing (coils are positioned at right angles to the probe shaft length, Differential Unshielded / Shielded)

Designation	Tip Ø ‘D’, in (mm)	Drop length, mm	Length, mm	Frequency	Connector	Material
RO3.18×85 RD	1/8" (3.18)	45	85	200 kHz -3 MHz	4-pin Fischer connector (to Hocking, GE, Rohmann and Forester drive units, etc.)	Fe/NFe
RO3.57×85 RD	9/64" (3.57)	45	85	200 kHz -3 MHz		Fe/NFe
RO3.97×85 RD	5/32" (3.97)	45	85	200 kHz -3 MHz		Fe/NFe
RO4.37×85 RD	11/64" (4.37)	45	85	200 kHz -3 MHz		Fe/NFe
RO4.76×85 RD	3/16" (4.76)	45	85	200 kHz -3 MHz		Fe/NFe
RO5.16×85 RD	13/64" (5.16)	45	85	200 kHz -3 MHz		Fe/NFe
RO5.56×85 RD	7/32" (5.56)	45	85	200 kHz -3 MHz		Fe/NFe
RO5.95×85 RD	15/64" (5.95)	45	85	200 kHz -3 MHz		Fe/NFe
RO6.35×85 RD	1/4" (6.35)	45	85	200 kHz -3 MHz		Fe/NFe
RO6.75×85 RD	17/64" (6.75)	45	85	200 kHz -3 MHz		Fe/NFe
RO7.14×85 RD	9/32" (7.14)	45	85	200 kHz -3 MHz		Fe/NFe
RO7.54×85 RD	19/64" (7.54)	45	85	200 kHz -3 MHz		Fe/NFe
RO7.94×85 RD	5/16" (7.94)	45	85	200 kHz -3 MHz		Fe/NFe
RO8.33×85 RD	13/64" (8.33)	45	85	200 kHz -3 MHz		Fe/NFe
RO8.73×85 RD	11/32" (8.73)	45	85	200 kHz -3 MHz		Fe/NFe
RO9.13×85 RD	23/64" (9.13)	45	85	200 kHz -3 MHz		Fe/NFe
RO9.52×85 RD	3/8" (9.52)	45	85	200 kHz -3 MHz		Fe/NFe
RO9.92×85 RD	25/64" (9.92)	45	85	200 kHz -3 MHz		Fe/NFe
RO10.32×85 RD	13/32" (10.32)	45	85	200 kHz -3 MHz		Fe/NFe
RO10.72×85 RD	27/64" (10.72)	45	85	200 kHz -3 MHz		Fe/NFe
RO11.11×85 RD	7/16" (11.11)	45	85	200 kHz -3 MHz		Fe/NFe
RO11.51×85 RD	29/64" (11.51)	45	85	200 kHz -3 MHz		Fe/NFe
RO11.91×85 RD	15/32" (11.91)	45	85	200 kHz -3 MHz		Fe/NFe
RO12.30×85 RD	31/64" (12.30)	45	85	200 kHz -3 MHz		Fe/NFe
RO12.70×85 RD	1/2" (12.70)	45	85	200 kHz -3 MHz		Fe/NFe
RO13.10×85 RD	33/64" (13.10)	45	85	200 kHz -3 MHz		Fe/NFe
RO13.49×85 RD	17/32" (13.49)	45	85	200 kHz -3 MHz		Fe/NFe
RO13.89×85 RD	35/64" (13.89)	45	85	200 kHz -3 MHz		Fe/NFe
RO14.29×85 RD	9/16" (14.29)	45	85	200 kHz -3 MHz		Fe/NFe
RO14.68×85 RD	37/64" (14.68)	45	85	200 kHz -3 MHz		Fe/NFe
RO15.08×85 RD	19/32" (15.08)	45	85	200 kHz -3 MHz		Fe/NFe
RO15.48×85 RD	39/64" (15.48)	45	85	200 kHz -3 MHz		Fe/NFe
RO15.88×85 RD	5/8" (15.88)	45	85	200 kHz -3 MHz		Fe/NFe
RO16.27×85 RD	41/64" (16.27)	45	85	200 kHz -3 MHz		Fe/NFe
RO16.67×85 RD	21/32" (16.67)	45	85	200 kHz -3 MHz		Fe/NFe
RO17.07×85 RD	43/64" (17.07)	45	85	200 kHz -3 MHz		Fe/NFe
RO17.46×85 RD	11/16" (17.46)	45	85	200 kHz -3 MHz		Fe/NFe
RO17.86×85 RD	45/64" (17.86)	45	85	200 kHz -3 MHz		Fe/NFe
RO18.26×85 RD	23/32" (18.26)	45	85	200 kHz -3 MHz		Fe/NFe
RO18.65×85 RD	47/64" (18.65)	45	85	200 kHz -3 MHz		Fe/NFe
RO19.05×85 RD	3/4" (19.05)	45	85	200 kHz -3 MHz		Fe/NFe
RO19.45×85 RD	49/64" (19.45)	45	85	200 kHz -3 MHz		Fe/NFe
RO19.84×85 RD	25/32" (19.84)	45	85	200 kHz -3 MHz		Fe/NFe
RO20.24×85 RD	51/64" (20.24)	45	85	200 kHz -3 MHz		Fe/NFe
RO20.64×85 RD	13/16" (20.64)	45	85	200 kHz -3 MHz		Fe/NFe
RO21.03×85 RD	53/64" (21.03)	45	85	200 kHz -3 MHz		Fe/NFe
RO21.43×85 RD	27/32" (21.43)	45	85	200 kHz -3 MHz		Fe/NFe
RO21.83×85 RD	55/64" (21.83)	45	85	200 kHz -3 MHz		Fe/NFe
RO22.23×85 RD	7/8" (22.23)	45	85	200 kHz -3 MHz		Fe/NFe
RO22.62×85 RD	57/64" (22.62)	45	85	200 kHz -3 MHz		Fe/NFe
RO23.02×85 RD	29/32" (23.02)	45	85	200 kHz -3 MHz		Fe/NFe
RO23.42×85 RD	59/64" (23.42)	45	85	200 kHz -3 MHz		Fe/NFe
RO23.81×85 RD	15/16" (23.81)	45	85	200 kHz -3 MHz		Fe/NFe
RO24.21×85 RD	61/64" (24.21)	45	85	200 kHz -3 MHz		Fe/NFe
RO24.61×85 RD	31/32" (24.61)	45	85	200 kHz -3 MHz		Fe/NFe
RO25.00×85 RD	63/64" (25.00)	45	85	200 kHz -3 MHz		Fe/NFe
RO25.40×85 RD	1 (25.40)	45	85	200 kHz -3 MHz		Fe/NFe

RO	3.18	x	85	RD (Sh)
1	2		3	4

1. RO – dynamic rotating probe for bolt holes testing.

2. Range of hole size, mm.

3. Probe length, mm. Standard length of 45 mm (1,8") can be changed upon request. To be chosen based on the required working length (“WL”).

4. Probe type designation: “RD”

”R”(Rigid) – rigid metal housing made of stainless steel, “D”(Differential).

Probes of standard type are manufactured unshielded. In case a shielded probe is required, when making an order, please indicate the letters ”Sh” (Shielded) at the end of a designation code.